AMPEREX PQ 6DJ8 ECC88 VACUUM TUBE 1972 PERFECT PAIR ORANGE PREMIUM QUALITY 10KHR

Description

TUBE HUNTER VACUUM TUBE GEMS
THESE ARE THE SPECIFICS OF THE TUBE/TUBES FOR SALE
THESE ARE THE TUBE/TUBES FOR SALE:
MANUFACTURER:
AMPEREX
PRODUCTION CITY:
HEERLEN NETHERLANDS
TUBE TYPE:
6DJ8, ECC88
DESIGNATION:
PREMIUM QUALITY PQ
YEAR:
1972,3
MONTH:
Date code match
SILK SCREEN CONDITION %:
100%
MICA:
2
PLATES:
GREY
CURVE TRACER ma: NORMAL 33ma               TUBE 1
35ma
AND
34ma
@
90PV
&
0 GRID
CURVE TRACER ma: NORMAL 33ma               TUBE 2
34ma
AND
35ma
@
90PV
&
0 GRID
TRANSCONDUCTANCE: NORMAL gm = 1250  TUBE 1
1325
µmhos
AND
1290
µmhos
TRANSCONDUCTANCE: NORMAL gm = 1250  TUBE 2
1290
µmhos
AND
1325
µmhos
PERCENTAGE OF BOGEY:          TUBE 1
105%
AND 103%
PERCENTAGE OF BOGEY:          TUBE 2
103% AND 105%
SINGLE/PAIR/QUAD/MULTI:
PAIR
GETTER:
PLATE FOIL GETTER
DATE CODE
VARIES
THIS AUCTION IS FOR ONE PAIR.
CURVE TRACER MATCHED!!! TESTING ACCORDING TO DATA SHEETS FOR 6DJ8’S ARE AS FOLLOWS: 90 PLATE VOLTS,
MARGINAL GOOD
65%: 21.4ma
,
LOW NOS
85% = 28ma
,
NOS
100% = 33ma
.
THIS PAIR MEASURES:
35, 34, 34, 35ma
.
DATES ON THE TUBES MAY VARY FROM 72-73 BUT THE TUBES WILL BE gm MATCHED BY THE 576 CURVE TRACER!
Tubes sold in this auction must measure above 30ma and balance within 2%.
These tubes are an awesome preamp PAIR. They were made in  USA. All of the pairs measured total deflection on my meter.
On my tester a B&K 747 tester:
Below 55 = BAD
55-65 = ?
65 -100 = Good
100-120+ = NOS
NOTES ON THE BOXES.
LISTING WILL GENERALLY HAVE INFORMATION ABOUT ANY BOXES ASSOCIATED WITH THE TUBES FOR SALE. THESE ARE THE OPTIONS:
1. NO BOXES PROVIDED (NONE AVAILABLE USUALLY USED AND SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED.
2. REPURPOSED BOXES. THESE ARE BOXES OF THE SAME MANUFACTURER. THESE WILL HAVE A LABEL OVER THE TUBE NUMBER THAT REFLECTS THE TUBE BEING SOLD. THESE TUBES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED.
3. TUBEHUNTER BOXES. THESE ARE BOXES I HAVE MADE WITH GREAT TIME AND EXPENSE TO PROTECT YOUR VACUUM TUBES AND PROVIDE FOR STORAGE AND EASY IDENTIFICATION. TUBES IN THESE BOXES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED.
4 WHITE BOXES. SHOULD BE SELF EXPLANATORY.
TESTING OF TUBES:
THIS IS DONE ON A NUMBER OF TESTING DEVICES
1. TEKTRONIX CURVE TRACER
2. B&K 747 TUBE TESTER
3. MERCURY 1000 DYNAMIC MUTUAL CONDUCTANCE TESTER
INTERPRETATION OF RESULTS:
NOS = 80% TO 135%
GOOD = 65% TO 80%
? OR MARGINAL : 55% TO 65%
BAD = 55%
TESTING RESULTS SHOW HOW THE TUBE IS PERFORMING  NOW.
TESTING RESULTS DO NOT SHOW HOW OLD A TUBE IS OR HOW MANY HOURS IT HAS BEEN USED. HOWEVER IF A TUBE TEST NOS YOU CAN BE ASSURED IT WILL LAST A LONG TIME AND IS WORKING VERY WELL.
I want to see you happy with your purchase. I will never sell a tube that is below standard……
I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way.
I want your business now and in the future, so I assume you are the boss, and I am the employee.
All tubes are tested for shorts, continuity, and emissions.
I prefer PayPal.
ALL CUSTOMERS PLEASE READ ALL NOTES BEFORE BUYING FROM ME !!
1.  RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer.
If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button.
Sound quality is tremendously
SUBJECTIVE
. For tubes returned for "noise" or "sound quality of any kind" you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping.
2.
PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT.
3.  UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!!
4. TESTING: I test all tubes that I sell in one way or another, or I will state "untested". I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the "Item condition box". To further help the buyer I also include the "Design values", for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,
Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy.
5.
Please note: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I don't guarantee or imply anything else.
6.
VERY IMPORTANT!!!
Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage.
7. I don't check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you don't like the noise level or the tone we offer a hassle free refund policy.
International customers note:
1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue.
2.
Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws.
3 International buyers if you bought more than one item and want combined shipping it will ship in 2 days.
4. And all the Angels sang because the heavenly music was playing and it was turned all the way up.
SINGLE/PAIR/QUAD/MULTI:
PAIR
GETTER:
O  GETTER
DATE CODE
75-36
This auction is for
ONE PAIR!
These are awesome Heerlen made 6DJ8'S.  All of the tubes test at NOS levels.  The silk screen looks beautiful and they are in almost perfect condition. They will sound sweet!!! They will not last more than a few weeks and they will be gone. Get them while you can.
This is what TUBE WORLD says about  HEERLEN tubes: "
(This is a very good audio preamp tube; very detailed, good base definition, punchy midrange, has warmth, instruments sound very natural, excellent vocal reproduction, recommended) (The best sounding 6DJ8 are made in Holland and Germany, these sound superb in the HEART tube CD player)"
On my tester a B&K 747 tester:
Below 55 = BAD
55-65 = ?
65 -100 = Good
100-120+ = NOS
I want to see you happy with your purchase. I will never sell a tube that is below standard……
I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way.
I want your business now and in the future, so I assume you are the boss, and I am the employee.
All tubes are tested for shorts, continuity, and emissions.
I prefer PayPal.
ALL CUSTOMERS PLEASE READ ALL NOTES BEFORE BUYING FROM ME !!
1.  RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer.
If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button.
Sound quality is tremendously
SUBJECTIVE
. For tubes returned for "noise" or "sound quality of any kind" you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping.
2.
PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT.
3.  UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!!
4. TESTING: I test all tubes that I sell in one way or another, or I will state "untested". I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the "Item condition box". To further help the buyer I also include the "Design values", for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,
Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy.
5.
Please note: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I don't guarantee or imply anything else.
6.
VERY IMPORTANT!!!
Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage.
7. I don't check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you don't like the noise level or the tone we offer a hassle free refund policy.
International customers note:
1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue.
2.
Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws.
3 International buyers if you bought more than one item and want combined shipping it will ship in 2 days.
4. And all the Angels sang because the heavenly music was playing and it was t
Listing and template services provided by inkFrog